
Light color
Lightening color adapted to Scandinavian hair. Odorless, nourishing and ammonia-free. It is important to choose a color mix that neutralizes the yellow-orange base that is naturally in the hair. Color no. 9.12 and 9.21 are the coldest shades and 12% the strongest lightening of the color. Vegan and ppd-free.
All our color packs are mixed in bowl and applied with a brush
Light color:
A lightening color is used to dye hair lighter, or to prevent the hair from becoming darker. A lightening color is a more transparent color compared to a permanent hair color as this is mixed with 90ml h2o2 to 2 color tubes, while a permanent hair color is mixed with 60ml to 2 color tubes. Here the strength of H202 determines the lightening. In order for the hair not to become darker, 3% and 12% are used for maximum lightening. Lightens up to 4-5 tones.
You want never To achieve platinum blonde hair with only light color, you must bleach your hair beforehand.
The difference between dyeing your hair light and bleaching it is that lightening extracts some pigments and adds pigment. While bleaching only extracts pigments. With a lighter lightening, a lightening is more gentle and leaves a natural result. You never get a very cold end result with a lightening, as the golden natural pigments will shine through a little.
If you want a natural result, you should always use a color with cold pigments to neutralize the golden pigments that are naturally present in hair.
Here you will find an explanation of the structure of the different hair colors. A natural color is a color that does not contain a dot and numbers behind it. This will always cover a certain area better and provide better durability. A reflex color is a color that has numbers behind the dot in cold or warm shades. The hair closest to the scalp always attracts more warm pigments, while the lengths and ends always attract more cold pigments. The lengths and ends always attract more color and therefore we recommend a lighter shade in the lengths for an even result from root to tip.
![]() | No. 0.0 - Clear |
![]() | No. 10.02 - Cold Very Light Blonde |
![]() | No. 10.1 - Ice Light Blonde |
![]() | No. 10 - Very Light Blonde |
![]() | No. 9.3 - Golden Blonde |
![]() | No. 9.12 - Cold Blonde |
![]() | No. 9.21 - Very Cold Blonde |
![]() | No. 9 - Light Blonde |
![]() | No. 8.43 - Light Copper Blonde A natural copper color, perfect for natural redheads. High yellow content provides brightness, while orange dominates for a rich copper tone. The balance creates a light but distinct copper color. |
![]() | No. 8 - Blonde |
![]() | No. 7.34 - Deep Copper Blonde |
![]() | No. 7.1 - Cold Dark Blonde |
![]() | No. 6 - Light Brown |
![]() | No. 5.8 - Chocolate brown |
![]() | No. 5.82 - Cold Chocolate Brown |
![]() | No. 5.1 - Cold Brown |
![]() | No. 4 - Dark Brown |
![]() | No. 3.11 - Ice Dark Brown |
![]() | No. 1/2 - Black |
There is a big difference between coloring uncolored hair and hair that has already been treated.
Uncolored hair needs more pigment, i.e. a darker color and a longer exposure time than already treated hair. The main reason for this is that treated hair is already open so the pigments are absorbed into the hair faster. While uncolored hair needs time to open. Already colored/lightened hair will therefore always be darker than uncolored hair if you use the same hair color and the same exposure time on the entire hair.
Light color:
Lightening is best done on completely dry hair and is best done if the hair is not freshly washed as the oil layer on the scalp will protect it a bit. Dry shampoo should be washed out before lightening as this can cause a chemical reaction. Lightening will never give a cold hair color if used on virgin hair.
It is recommended that the hair is not freshly washed before applying the lightening dye, as the fat layer on the scalp offers protection. The lightening dye is always applied to completely dry hair. The amount of lightening achieved depends on the strength of the H2O2. Use 3% to avoid the color becoming darker. For a light lightening, 6% and 7.5% can be used. For a stronger and more visible lightening, 12% is recommended, but this should only be used on untreated hair or hair that is strong. The result can often be improved with the help of a friend during application.
If you have dark hair, a light color will not make it completely light and cool, so you will need to bleach it first. However, we often recommend light color in the lengths and ends to avoid a darker result.
Mixing ratio:
Light color:
Mix together H2O2 (90ml) and Mix (2 tubes)
Procedure:
The application process should begin at the back or at the darkest hair and work your way through the entire regrowth or base. Finish the application around the face, as this hair is thinner and lightens more quickly. To achieve an even result, the regrowth should not exceed 3cm.
Remember that the hair color does not start working until it is out of the color bowl, so if the application takes a little longer, it will not affect the final result.
Lengths and ends that are drier can absorb a lot of color, so they can be lathered up when rinsing.
Here, light color is used in the lengths:
N:2 H2O2
Water, hydrogen peroxide, propylene glycol, cetearyl alcohol, sodium C12-18 alkyl sulfate, disodium EDTA, ceteareth-20, sodium stannate, phenoxyethanol, methylparaben, ethylparaben, ceteareth-25, propylparaben, butylparaben, phosphoric acid, argania spinosa kernel oil.
N:3 Mix
water, cetearyl alcohol, propylene glycol, ethanolamine, ceteth- 24, dihydroxyethyl soyamine dioleate, glyceryl stearate, sodium ammonium sulfate, isopropyl myristate, oleum papaveris seminis (poppy) seed oil, gossypium herbaceum seed oil, glycerin, tetrasodium EDTA, sodium ascorbate, caprylic/capric triglyceride, methyl glucose sesquistearate, cetyl alcohol, ceteareth-20, butyrospermum parkii (shea) butter, polyquaternium - 28, perfume. See more specified ingredients by color inside the box.