Instructions for use minicolor

Preparations:

Your hair does not need to be freshly washed, but it is important that you do not have dry shampoo or color spray in your hair before coloring.

WE recommend using our SKIN oil which is applied around the hairline, so that the color does not stick to the skin :) This oil is very thick and lasts a very long time. A tip is to use a few drops in the mixture on your lengths to make your hair even shinier and stronger.

Mixing ratio:
Minicolor small: H2O2 1.5% (60ml) + 2 tubes Color mix.

Mixing ratio:
Medium package: H2O2 1.5% (90ml) + 3 tubes Color mix.

Small mix minicolor

Application:

A minicolor is applied to dry hair. Always start the application at the very base of the scalp, in the regrowth. If you already have color in the lengths, we recommend that you use a lighter color there, as dry lengths and ends absorb a lot of color and can then become darker.

Reduce the exposure time on the lengths and ends if you are using the same color throughout your hair. Often you can just lather up the color there for a nice refresh.

Operating time: 35min, but if you have grey hair we recommend extending the working time to 45 min for better coverage.

Refresh the color at the ends:
Rinse your hair with about 2-4 dl of water, then lather the color into the ends like a shampoo. Leave it on for 1-5 minutes before rinsing out.

Flushing:
After a color treatment, it is important to rinse your hair thoroughly. Wash your hair twice and finish with a good hair conditioner.

Lather up the color in the lengths for a nice refresh: